Emerson NJ Furnace and Air Conditioning Repair Installation Service

System ductwork causing airflow issue leading to the tripping of the big limit safety. Bedroom return 12x12x1 with 10” flex. Hallway return 12x24x1 with 14” flex. Manometer readings: 0.65WC return and 0.15WC supply . 0.8WC delta. Adjusted the zone setting on the zone control panel to stop heating before the furnace limit switch trigger. This should stop the furnace from turning off in high limit and blowing air to all zones.

Performed Silver repair on Comfort Control Circuit system for zone 1 left side second floor. Confirmed operation of system and both zone. Observed battery light in 2 thermostat. As a courtesy replaced four double AA batteries in each thermostat. Bedroom thermostat still showing alarm for low battery. Show homeowner disc style battery that is also in the thermostat.

Arrived onsite for heating issue. One zone is over heating. Found a fault in the comfort control circuit system. Will provide options for repair via email.

Arrived onsite for heating maintenance 2 gas fired furnace 1 in basement and 1 in the attic. Attic Furnace unit: Turn heat on and confirmed operation. Notice the system running hot and turning off. Homeowner mentioned having air flow issues to office space. Confirmed operation of both zone dampers. Adjusted manual dampers to minimize zone 1 air flow and increase air flow to zone 2. Made the office zone flex duct more taunt to increase air flow. Homeowner noticed increase heat to the room. Noticed that the air flow, CFM, through the furnace could be improved with better return air. Homeowner is also interested mini split heating and ac solutions.

Arrived onsite for maintenance for one gas fired boiler. Requested the customer turn on the thermostats up to heat and confirm operation of the boiler and each zone valve. Turned the boiler off and removed and cleaned all burners and wiped cleaner the burner compartment: performed a visual inspection of all electrical and inspected all external water components such as the exp tank, fill valve, backflow preventer and the circulator pump. System working as it should.

Boiler repair for a customer, after 3pm arrival. EPP-Customer reported a fan-like sound when the boiler is off. Will have a technician on-site before 4pm to inspect the boiler.

No arrival time given; EPP 2C-Maintenance. Customer will have filters on site.

11-1 Arrival; EPP 1C- Maintenance. Customer has elected to change filter on their own, said she might pick one up just in case but is not worried about the filter.

Furnace Maintenance: Conducting routine maintenance on a residential customer's furnace, I replaced the air filter, cleaned the burners, and checked for gas leaks. To ensure the unit's safe operation, I also conducted a carbon monoxide test. This comprehensive maintenance regimen ensures the furnace's optimal performance, safety, and longevity.

Annual heating maintenance on American Standard Gas Fired Furnace with UV air cleaner system

Annual maintenance on Gas Fired Crown Boiler